Monday - Friday

9:00 AM - 8:00 PM

Step-by-Step Process in Cleaning Windows

Window cleaning is an important part of home maintenance, and it’s a job that can be done by most people with a little bit of instruction.

In order to clean your windows effectively, you’ll need the right tools and supplies, and you’ll need to follow these simple steps.

Start by gathering your supplies

You’ll need some dish soap, a bucket, a sponge or cleaning cloth, and a squeegee. If you have very dirty windows, you may also need a scrub brush.

Make sure that the cleaning cloth is lint-free so that you don’t end up with streaks on your windows.

Fill the bucket with warm water and dish soap

You’ll want to use about a gallon of water for every three or four windows. Add a few drops of dish soap to your bucket of warm water and mix it together until the soap is fully dissolved.

If you do not have any dish soap, the best alternative is white vinegar.

Begin washing the windows with your sponge or cloth

Dip your sponge or cleaning cloth into the bucket of soapy water and then begin washing the window in a circular motion. Be sure to clean the entire surface of the window, including the frame.

If you have a very dirty window, you may need to scrub it with a brush before rinsing.

Rinse the windows with clean water

Once you’ve finished washing the window, dip your sponge or cloth into a bucket of clean water and rinse off all of the soap.

Squeegee the water from the window

Use your squeegee to remove all of the water from the window, moving from top to bottom in even strokes. Be sure to wipe the squeegee blade clean after each stroke.

If there are any streaks on the window, you can use a lint-free cloth to buff them out.

Repeat steps 3-5 for each window

Continue washing and rinsing your windows until they’re all clean. Don’t forget to clean the outside of your windows as well!

Extra Tips and Do’s and Don’ts When Cleaning Windows


  • Do wipe up any water that drips down the window onto the sill with a towel. This will help prevent mould and mildew from growing.
  • Do clean your windows on a cloudy day or in the evening when the sun is not at its strongest. The heat from the sun can cause the cleaning solution to dry too quickly, which will leave streaks on your windows.
  • Do use a microfiber cloth or squeegee to avoid streaks.


  • Don’t use harsh chemicals like ammonia or bleach on your windows. These can damage the glass and leave behind harmful fumes. A dish soap solution is all you need to clean most windows.
  • Don’t forget to clean your window screens! You can vacuum them with the brush attachment or wash them with soapy water. Many people only focus on the inside, but it’s just as important to clean the exterior of your windows.

Cleaning your windows doesn’t have to be a difficult task. By following these simple steps, you can get streak-free results every time. But if you want to convenient way, you can always opt for professional window cleaners